 |
 |
|
Under Advanced Chipset Features, we set the CAS Latency to
2, then 5-2-2 is set to precharge, ras to cas and ras precharge, the rest
are set to defaults. |
Under Frequency/Control there are many
options which you could adjust. The first is the CPU Host Frequency which
is the FSB. For P4 800Mhz, it is 200Mhz, The BIOS allows you to select up
to 355Mhz FSB at 1mhz steppings |
 |
 |
|
The PCI/AGP can be fixed at 33/66 or other
FIX pci/agp settings as shown above. |
4 DIMM slots supporting up to 4GB of
DDR266/DDR333/DDR400 using 184pin unbuffered ECC DDR allowing up to
6.4GB/s data transfer rate. |
 |
 |
|
The PCI/AGP can be fixed at 33/66, DDR Bus
frequency can be set to AUTO and at various ratios so that CPU can run at
async 200mhz fsb, ram can run at 133, 166, 200Mhz. |
AGP voltage can be adjusted up to +0.3v of
default of 1.5v. |
 |
|
|
CPU Vcore can be adjusted from 0.835v to
1.76v at intervals shown above. |
|
