Foxconn Winfast 6150K8MA-8EKRS Socket 939 (GF6150)
Intro 5/5 Bluetooth 14 Nov 2005
BIOS II
Vdimm can be adjusted up to 2.85v which is
necessary to run CAS 2, 5-2-2, 1T stable (you would need at least 2.75v)
Vcore Voltage can be upped by adding up to
+140mV.
To overclock, lower the K8<->NB HT speed.
The above is the default. In our test, we set everything to 5x. As for
NB<->SB HT Width, we tried to set it to 16 up 16 dn but that resulted in no
POST. We left it at 8 up 8 down.
Memclk is for ASync clk operation, we run
in SYNC, so itis set to 200. Options are 133, 166. The ram timing we used is
CAS 2, 5-2-2. In fact, running CAS 2, 6-2-2 adds more stability to the
system.
