ECS
NFORCE 570 SLIT-A NF 570 SLI Intel Edition Conroe Mainboard Review Intro 5/5 Bluetooth 29 Aug 2006
Pricing
of
ECS NFORCE
>>>
BIOS Screen shot
MEM Speed (DDR) can be set to run at the default 533/667 or
higher. The range allows one to run the DDR2 at DDR2-400 to DDR2-1300. Take
note that the specs only supports up to ASync DDR2-667. We tested the board
running CAS 5 DDR2-800, the system is not stable as it is already out of
spec.
Over here, ram timings can be adjusted. In
our test, we ran in SYNC with CPU at CAS 3, 3-3-8, 1Tcmd.
CPU Voltage can still be adjusted upwards
with this option. A maximum of 1.6v can be set on this board for the X6800.
VRAM (VDIMM) voltage can be adjusted. The
default is 1.80vwhich you can set it up to 2.20v.
LDT Frequency makes it apperance on a board
for INtel processor. This is supposedly the HT LINK Freq between the North
and South bridge. We set it to AUTO
