EPoX EP-9U1697GLI-J (ULi M1697) Intro 2/5
Bluetooth 30 Jan 2006

Gallery

The board comes with 3 PCI, 1x PCIe x2/x8, 1 x PCIex2 and 1 x PCIex16/x8. The PCIe slots can be configured to work in single card mode of PCIe x16 or run it in a dual 8x mode by setting the yellow jumpers located at the centre of the mainboard.

The power on board is based on a 3 phase design. If you notice, Behind the slots are I/O controller chip, audio codec and at the centre you will see the Marvell PCIe GbE controller chip and Realtek Fast Ethernet PHY. On the left is the ALC 850 audio codec.

Further down to the left, you will see the 4 SATA II ports, 2 IDE channels supported by the ULi 1697 single chipset. The power on, reset buttons, P80P Debug LED, Floppy connector and BIOS are all located on the left corner of the board.

The back panel consists of PS/2 Keyboard and Mouse,1 COM port, 1 coaxial out, 4 USB, 1 GbE, 1 FastEthernet port and 8ch audio ports.

Discuss in Forum

Next >>>

(C) Copyright 1998-2009 OCWorkbench.com