Under Smart Settings, you can choose to load Bios default, Load performance default for a AHCI or IDE/SATA configuration or load a power saving setup default. The performance defaults o/c the iGPU making the board performs better in graphics.

There are various overclocking modes. It can be set to Auto, Manual, I.O.T or Optimized. If you want to fix the FSB to the 266, just set Manual and enter 266 into the CPU Freq.

In the Intelligent overclocking mode, you can up the PCIe bus and CPU freq by up to 30%

In manual o/c the FSB range can be set within from 100MHz - 800MHz

DRAM Frequency sets the memory to run in ASync. In our example, we used E6550 and have to set the jumpers so that we can run the memory at DDR2-1066. In fact, the memory runs at a ratio that gives it DDR2-1000.

The amount of share memory. For 2GB DDR2 on board, 256M is shared for use with the integrated GPU