ASRock X48TurboTwins-WiFi Intel X48 chipset mainboard review - BIOS Screen shots
Bluetooth 15 Jun 2008

BIOS 1

The screen shots are taken with board installed with a Intel QX9770.

Over at this screen, the main settings for CPU Frequency and PCIe Frequency can be set. CPU Frequency ranges from 100 ~ 800MHz while PCIe Freq ranges from 100~150MHz. Overclock mode can be ASync, Sync or Auto. Multiplier can be set too (supported CPUs like ES).	DRAM Frequency can be set to operate in ASync memory settings of 400,533 or 800MHz. Options will be different if you use DDR2 module. Note: If you use DDR2-1066, you need to set the jumpers, please refer to manual for settings. Ram timings can be set on this page too.
Voltage for DRAM can be set up to 2.40v for DDR3!	CPU voltage can be upped to 1.60v

Discuss in Forum

Next >>>

(C) Copyright 1998-2008 OCWorkbench.com