Mainboard Layout of SUPoX AP45+GTR Intel P45 +ICH 10R mainboard with Q-SSD
The board is equipped with 3 full length PCIe Gen 2l slots. The orange and yellow slots can be used to run in CrossFire X mode. The black coloured is a x4 PCIe pulled from the south bridge. We would assume that it should be able to do 3 way crossFire X if the driver permits. Thus, the board can be configured to run in a single PCIe x16 or a Dua PCIe x 8 for CrossFire X.
There are 6 SATAII ports supported by ICH10R and 2 more SATA II by Jmicron JMB363. The JMB also supports an additional IDE channel. At the back of the heatsink is another SATAII port for connecting to eSATA connector.
At the rear panel are PS/2 mouse and keyboard connector. There is a coaxial and
SPDIF out. As for display, there is D-SUB, DVI-I and HDMI out. There is 4
USB, 1 eSATA, 1 GbE and 8ch audio ports right beside it.
The rear panel comes with PS/2 Keyboard/mouse. There is also SPDIF Coaxial & Optical output and rear panel SPDI Coaxial input. There is a eSATA port, 6 USB, 1 GbE and audio ports.
(C) Copyright 1998-2008 OCWorkbench.com