SUPoX announces Intel X58 LGA1366 mainboard SUPoX AP58+GTR

[bluetooth]

Specs

CPU Socket:
Socket LGA1366 for Intel Bloomfieldprocessorseries
Support Intel Nehalem Core i7 965XE/940 /920 processor
Support Intel QuickPath interconnect(QPI)bus up to 6.4GT/s bondwidth
Support Intel Simultaneous Multi-Threading(SMT) technology
Support Intel CPU manufactured in 45nm process.

Chipset:
Intel X58 +ICH10R

System Memory:
SiX 240-pin DDR3 SDRAM DIMM sockets
Support 1.5v DDR3-1066 DIMMs with 3 channel architecture compliant with 192bit bondwidth

Support single-sided or double-sided, non-ECC, DIMMs with 512Mb/1Gb/2Gb devices
Support up to 32GB system memory

Expansion Slots:
Two PCI connectors compliant with PCI v2.3
One PCI-Express (x1) connector compliant with PCI Express 1.0a
Three PCI Express (x16) connector compliant with PCI Express 2.0a(working in X16+X16 or X16+X8+X8)

USB:
Twelve USB connectors compliant with USB2.0 from embedded USB controller (4 connectors at rear panel)

S-ATA:
Six S-ATA II ports with up to 300MB/s bandwidth from ICH10R, Support intel Matrix Raid 0,1,)+1,5

Enhanced S-SATA

Two SATAII port with up to 300MB/s bandwidth from enhancd JMB363

P-ATA
One IDE port with up to 100MB/s bandwidth from enhancd JMB363

Q-SSD/ CF Card

One CF-X333 port with up to 80MB/s bandwidth for DIY SSD / HDD, Q-SSD is SUPoX features for DIY value SSD idea

Dual LAN:
Two Gb Ethernet from Realtek RTL8111B(Colay Rtl8111C)PCI-E (x1) controller

Q-Fi enhanced card for WiFi / Bluetooth (Optional)

Support wireless LAN compliant with IEEE802.11a/b/g
Support Bluetooth communication compliant with bluetooth V2.0 + EDR and under

Audio:
Selectable 2, 6 or 8-CH audio from Realtek ALC888 (Colay ALC888S,)HDA compliant CODEC
Support rear panel SPDIF Coaxialoutput. (Optional)
Support Aux-In, CD-In
Support Front panel audio for Mic-In and stereo Line-out only.
(Front panel Line-out electrically shared with rear panel Line-out).
Support Jack detection for fool-proof audio device installation

I/O:
Onboard Winbond W83627EHGLPC bus I/O controller
Legacy peripheral interface for PS/2 keyboard & mouse, FDD, One Serial and IrDA (v1.0 compliant)
Support Hardware Monitoring for fan speed monitoring, CPU and System temperature.
Intelligent fan speed control for CPU-fan (PWM) for quiet operation

BIOS:
8Mb Flash EEPROM with Award Plug & Play BIOS (Colayout with 8 pin SPI ROM)
Support Q- Boot for fast bootable device selection

Special Features:
Support KBPO (Keyboard Power ON) function
Support Wake-On-LAN by PME
Onboard 80 Post-Port LED display
Onboard Q-Button for convenient power-on,Reset ,Clear CMOS
Support Asynchronous clocking mode between FSB and PCI/PCI-E

Q-Tune BIOS for excellent overclocking features:
Programmable FSB and PCI Clock output frequency with 1MHz fine tuning
Support BIOS adjustable CPU multiplier, FSB clock, PCI-E x16 clock, DIMM frequency
Support BIOS adjustable voltage for CPU Core, chipset and DIMM

Powerful utilities for Windows:
Q-Tune Flash for BIOS update without requiring DOS flash utility and bootable diskette
Q-Screen for personal bootup screen design


Form Factor:
305mm x 245 mm x 40mm, ATX Size

Supported O/S:
Windows 2000/Windows XP/Vista

Accessories
User’s manual
4 S-ATA data;
2 Enhaned USB Cabel(Optional)
CD for drivers, utilities and bundle software
IO shield