Please state the nature of your 1T command issues and include as much info. as possible about your system setup.(software/hardware/BIOS settings, etc.)
I'm curious as too how prevalent this problem is across different mainboards and configurations. It seems to be more common than most people think and not limited to any one make or model.
I was using a matched pair of Corsair XMS4400(DDR550) :D on an ASUS A8V(K8T800-PRO) :D and I couldn't get the memory to run 1T/Synchronous @ stock speed(200-MEM/200-HTT) with a rated 2.75v Vdimm and loose timings. Increasing voltage only made things worse. :(
Asynchronous timings(192.5-MEM/245-HTT) run error free at 1T and I was able to duplicate this with 2 decent Micron 1GB modules(2GB total).
| AMD Athlon64 3800+(2.4GHz/939/E3 Venice/1.35-1.4v Vcore) @ 2695Mhz/1.5v Vcore ** ASUS A8V(non-Deluxe) @ 245Mhz HTT x 4(16/16) ** 2 x 1024MB Infineon DDR400 @ 5:3 HTT/MEM(386Mhz DDR-2.5,3,3,7) ** Sapphire 9800PRO(R360) modded to 9800XT w 412MHz-CORE/365Mhz-MEM ** 250GB Western Digital ATA100/7200RPM/8MB buffer ** Enermax 450w PSU |
|
[ 26. October 2005, 11:04 AM: Message edited by: OC-Tweak ]