Gigabyte GA-K8N51PVMT-9 voltage mod

[bluetooth]

Anyone bought this board?

[bluetooth]

Review is online
http://www.ocwforums.com/2006/gigaby...1PVMT-9/g1.htm (US/EU)

http://www.ocworkbench.com/2006/giga...1PVMT-9/g1.htm (ASIA)

[tb3o3]

Originally posted by Bluetooth:
Review is online
http://www.ocwforums.com/2006/gigaby...1PVMT-9/g1.htm (US/EU)

http://www.ocworkbench.com/2006/giga...1PVMT-9/g1.htm (ASIA)

Nice review, just wish they had put voltage adjust in the BIOS!

[Vinis_JP]

Lots of people with problem in post

http://www.newegg.com/Product/Custra...82E16813128001

[bluetooth]

ASk them to come here. [img]smile.gif[/img]

[Vinis_JP]

I purchased this board.... I'm regret a lot :(

Bluetooth, you say in another post, the problem is because 2.6V vDIMM.

I'm using no-brand 1GB memory (hynix chips)
HY5DU12822CTP-D43

, and that require only 2.5V... and the problem in post persist.

Full config:
Athlon64 3200+ rev.E6
1GB n/b PC3200 2.5-4-4-8 (hynix chips)
250GB Maxtor DiamondMax10 S-ATA
LG 4167B
400W Evergreen SilentKing-4 PSU (ATX 2.0)

Sorry my poor english

[bluetooth]

But what ram timings are you using ? CAS 2.5 8-4-4 and problem persists? Did you try 2T cmd?

[Vinis_JP]

I'm using all default settings

Memory: 200Mhz
Latency: Auto (2.5-4-4-8)
Command Rate: 2T

I think this issue is because the new ATX 2.0 PSUs don't have -5V line
Doesn't problem in my SilentKing PSU, because work fine in another computer.
I tried with a old ATX 1.3 PSU (have -5V line), and finally working fine
But, I want to use my new ATX2.0 PSU.

[bluetooth]

You mean the board can't be used with ATX 2.0 psu?

[Vinis_JP]

I don't know, but, I tested this board with 3 ATX 2.0 PSUs, without success.
And tried with 2 ATX 1.3 PSUs, as working fine.