post your chaintech mobo oclocks please

[mxpxrulzz]

i'm curious to what you guys are getting. please post fsbXmulti ram timings etc

I have an identical setup to the one [H] reviewd (2400+ 7jns corsair} and they seemed to hit 200 pretty easy while I cant hit 188...

so for me:
180 x 11.5 (xp2400+}
mem at 6-2-2-2 (corsair xms pc3200)
7jns

thnaks guys

[Lazy]

190 x 12 (athlon xp 2400+}
memory at 5-2-2-2 (corsair xms pc3200)
7jns

stable with 11/29 bios
unstable with 1/15 (beta) bios

[mxpxrulzz]

lazy you know I hate you right ;)
where did u get your 2400+ from?

[Killer_T]

177 x 11.5 (xp 2200+)
mem at 6-3-3-2 (Geil pc3200)
7njs

using the 1/15 bios
havent tried the 11/29 bios
with this proc.

[Lazy]

*g i see.. [img]smile.gif[/img]

i bought it at litec-computer.de, a german hardware shop in munich (which has the biggest "computer-meile" in germany, what means, there are "millions" of pc shops and all are next to each other..so the prices are good g); but dont aks me which id the cpu has, no idea, i just bought it because i wanted a new cpu (before i had 2000+) for my new 7njs and the old 2000+ i put into the sys of my brother. hm, and yeah, i might say, i think, my pc is the loudest system in munich..i`m sure it is..but its ok i`m crazy and it`s cool.. [img]smile.gif[/img] but sometimes, i hate myself for my fans in my cs 601 case. *g* next month i want to build a water cooling solution, because it suckz a little bit, watching a nice romantic movie with a girl, you wanted to be your girlfriend, and she only blaims whole movie about my loud pc (because watchins some divx..g)..so..i think i have to change it.. *g*

at time using a heatpipe with a delta she fan on it, 2 blowholes in the upper side, three fans backside, 3 frontside, two in the side, 2 in case which blows @ video card and one moddet which cares about northbridge, and two at the ground which should blow the air up to the blowholes faster.. and all are taking the air in the case, just the 2 120 enermay up pull them out. i tried different ways, but this is the coolest (for my case)

i tried to get more fsb with 1/15 biosrev. and 2,8vdimm or 2,9 but no way; 190 is absolutly the end and at time only stable with 11/29 biosrev.; so i flashed back and waiting for final 4 version or a new 5rev.. and mybe if some hammer boards around, a new board. but sure no msi, aopen or gigabyte mainboard. nothing against them but my experience (worked for kmelektronik.de some time) showed me, that gigabyte isn`t a great manufacture if it depends on board layouts and aopen, hm i never was a fanatic of them..
msi? oh no.. i remember my kt3 u2-r board..no way that i will buy a msi board again. maybe chaintech, again, but have to wait.. and yeah, in my opinion 7njs is great, but sure, it has some strange actings, too, sometimes and sure, chaintech climbs up since building apogee and zenith boards, but they are both not without some trouble , or am i wrong? =)

and yeah, i like my good english..*gg* [img]smile.gif[/img]

[ozzmosisfrz]

Hey mxpx and lazy you guys need to use 6-3-3-2 for your corsair xms3200 memory. If you use that you will be able to get the 400fbs.

peace,
ozz

[RadioMan]

7VJL (plain vanilla w/ Chaintech mod)
AMD 1800XP Palamino
512 Meg of OCZ EL DDR PC-3700
Asylum Geforce 4200 ~ 128 meg
Lite On 48x24x48 CDRW
Lite-On 16X DVD
Allied 450 Watt Power Supply

Memory timing: 2-5-2-2-1T
FSB: 200 Mhz
Multiplier: 8.5
CPU Speed: 1700 Mhz equal to a AMD 2100XP
Temps: 39c idle 44/45c load

[[Ctrl]+[Alt]+[Del]]

1700+ locked @ fsb 171 , 1.85v
NCPRO :( pc3200 fulltweak, speed 171 :(

[dEADkIRK]

1800XP @ 192 Ram and 9.5 Multiplier using the 7NJS board.
DigiDoc temps are idle 53 C and 56 C stressed using Cpuidle Pro 6 and air cooling.
Not realy bad i would say :D

[icedeocampo]

7VJL
Athlon 1700XP

175x11 Tbred-A@ 1.7v