|
27-05-2004, 01:25 PM
|
|
Silver Member
|
|
Join Date: Apr 2002
Location: USA
Posts: 1,968
Potenza rep: 24
|
|
The only time I ever got any Infinion was some 2100 CL2.0
This was one of the best sticks of ram I ever had. Infinion makes good chips.
|
30-05-2004, 03:39 AM
|
|
Member
|
|
Join Date: May 2002
Location: Rzeszow - POLAND
Posts: 190
Potenza rep: 22
|
|
ok got my mobile and it performs great, but the kingston valueram is nothing impresive (it's a valueram... what was i expecting [img]smile.gif[/img] ) i can't go over 205fsb with 2.6vdimm did not increase the vdiim yet... i;m testing my cpu for stabiity
|
30-05-2004, 07:57 AM
|
|
Silver Member
|
|
Join Date: Apr 2002
Location: USA
Posts: 1,968
Potenza rep: 24
|
|
What timings do you have set on the Kingston?
What board?
|
31-05-2004, 06:16 PM
|
|
Member
|
|
Join Date: May 2002
Location: Rzeszow - POLAND
Posts: 190
Potenza rep: 22
|
|
cl 3-8-3-3 at 200Mhz... i got it to 3-6-3-3 on 200fsb (lower just not tested) and ist stable but iven if set to 3-10-3-3 it will not go over 205-210 (the system frezes)
|
01-06-2004, 12:07 AM
|
|
Silver Member
|
|
Join Date: Apr 2002
Location: USA
Posts: 1,968
Potenza rep: 24
|
|
My Kingston Value 400 seems to like 2.5-3-3-11 on my NF7-S
|
05-06-2004, 04:40 AM
|
 |
Bronze Member
|
|
Join Date: Jun 2004
Location: Czech republic
Posts: 817
Potenza rep: 20
|
|
Gortok, I own myself KD7-G too, and I can't believe you get it to run at 176Mhz 
Mine always lockign up and rebooting when I go over 166Mhz, for witch is rated - 166Mhz memory and 166Mhz FSB :D
The only one way to push it higher is to decrease the FSB. With FSB 100Mhz it can made 200Mhz but that FSB is too low for me, so I did not even tried it - ever...
You do and that way you get the 176Mhz???
OTOH, my Mushkins run at 206Mhz 2-2-2-5 with 2.77V, 216Mhz 2-2-2-5 with 2.9V  |
29-06-2004, 09:56 AM
|
|
Silver Member
|
|
Join Date: Apr 2002
Location: USA
Posts: 1,968
Potenza rep: 24
|
|
I've got some Corsair Value DDR400 in there. It has Spectec chips on it. It runs at that speed using stock vdimm (~2.6v). Sometimes, I can push it a little higher but it's not as stable. Now that summer is here and everything is a little warmer, I've dropped it back down to about 172... [img]tongue.gif[/img]
You might try loosening timings just a touch...Check to make sure your ram is rated for what you're running it at...or close anyway... ;)
|
09-07-2004, 04:28 AM
|
|
The one
|
|
Join Date: May 2000
Location: UK
Posts: 184,113
Potenza rep: 10
|
|
Corsair XMS3500c2
|
09-07-2004, 09:15 AM
|
|
Silver Member
|
|
Join Date: Apr 2002
Location: USA
Posts: 1,968
Potenza rep: 24
|
|
Quote:
Originally posted by Bluetooth:
Corsair XMS3500c2
|
You've got two 256's, right?
Are those the platinum or black heatspreaders? |
12-07-2004, 05:59 AM
|
|
Rookie
|
|
Join Date: Aug 2002
Location: Germany
Posts: 14
Potenza rep: 0
|
|
|
I use 2x256 Kingston HyperX PC3200 (KHX3200K2/512->Winbond BH-5 :D ) in Dualchannel Mode with CL2.0,2,2,5 Timings @218Mhz(436Mhz) @ 2.9V. Run smooth [img]smile.gif[/img] .
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
