Onpoint or Defender Need Raid help here!

[mentj]

Here's the confusion. The file on the web has a Fasttrak.inf from 11/22/01 and .sys same date and file number 2.0.0.21. The CD that came with the MB has the same .sys file but the .inf file is dated 1/30/02! Which would you recommend or have found that works????

[pastorjay]

I am using the one from 11/22/01 right now, so I would suggest that one. A Gigabyte tech told me the one on the cd was no good.

PJ

[mentj]

One last question (I HOPE!)
Use the WinXP Promise MBFastTrak 133 Lite or
WinXP Promise SBFastTrack 133 Lite driver?

THANKS

[pastorjay]

mbfasttrack

I had just as many questions, so don't worry about it. If you need anything else let me know...

PJ

[mentj]

<blockquote>quote:</font><hr>Originally posted by pastorjay:
mbfasttrack

I had just as many questions, so don't worry about it. If you need anything else let me know...

PJ<hr></blockquote>

You da man!!!!!!!!!!!

[nuffer]

pastorjay,

I having similiar problems to what is shown is this thread. I have set the bois to RAID, F6 during Win2000 install, used the RAID Drivers. When I use the RAID drivers, the install never sees the disks. When I use the ATA settings and use the ATA drivers from the web, I only see one of my disks.

I'm at a loss. Is it the promise chip? I have win2000 loaded but I don't always see both drives in the ATA mode. I boot and the other one may show up.

Your thoughts would be greatly appreciated or anyones.

see this post for more detail on my problem.
www.ocworkbench.com/ocwbcgi/ultimatebb.cgi?ubb=get_topic&f=18&t=000327
or
web page

Specs
Gigabyte GA-7VRXP
Bios lvl 4 and 7 both showed result
AMD Athlon XP 1800+
512MB - PC2700
Maxtor 40.9GB, 7200RPM (Two Drives for Raid0)
Lot # 2k3047E
Ver 1.1