| | ABIT
AT8 32X CrossFire Mainboard Review Intro 1/5
Bluetooth 9 May 2006
Pricing
from
various
vendors
>>> |
|
The mainboard
ABIT AT8 32X is the long awaited
mainboard from ABIT. This fanless mainboard, based on the ATi RD580, supports
Dual 16X PCIe CrossFire, an improvement over the AT8 which is based on the
earlier RD480 chipset which only supports Dual 8X PCIe lanes. This overclockers'
board has lots of voltage options available. Check out the BIOS screen shots for
more information.
AT8 32x supports the Socket 939 Athlon
64/64FX/64/Semrpon processor. It is based on the ATi RD580 chipset as north
bridge and the South bridge is based on the ULI m1575 chipset. It supports 4 x
SATA 3.0 Gb/s (RAID 0/1/0+1/5), SATA AHCI, providing native command queuing and
native hot plug. It also comes with a Dual on board Silicon Image Sil3132 PCIE
SATA 3Gb/s RAID controller. There is also GbE, 1394 and 7.1ch audio support.
CPU
- Socket 939 for AMD Athlon 64X2/ 64FX/ 64/ Sempron
Processors with 2000MT/s System Bus
- AMD CPU Cool 'n' Quiet Technology
|
|
Chipset
- ATI® CrossFire™ Xpress 3200 + ULI1575 chipset
- Support Dual Full PCIE x16 bandwidth to graphic
|
|
Memory
- Four 184-pin DIMM sockets
- Supports dual channel DDR400 ECC/non-ECC
un-buffered memory
- Supports maximum memory capacity up to 8GB
|
|
Graphic
- Two PCI Express X16 slots support Dual Graphic
card by ATI CrossFireTM Technology
- Two X16 graphics links for high performance
Crossfire configurations
|
|
ABIT Engineered
- ABIT µGuru™ Technology
- ABIT Silent OTES™ Technology
|
|
Serial ATA
- 4 x SATA 3.0 Gb/s (RAID 0/1/0+1/5)
- Supports SATA AHCI, providing native command
queuing and native hot plug
- Dual on board Silicon Image Sil3132 PCIE SATA
3Gb/s RAID controller
|
|
LAN
- On board 10/100/1000M PCIE controller
|
|
IEEE1394
- Supports IEEE1394 by PCI controller
|
|
Audio
- On board 7.1 CH HD Audio CODEC
- Support S/P DIF In/Out
- Dolby Digital Live technology
|
|
Expansion Slots
- 2 x PCI Express X16 slots
- 2 x PCI Express X1 slots
- 2 x PCI slots
|
|
Internal I/O
Connectors
- Floppy Port supports up to 2.88 MB
- 2 x Ultra DMA 33/66/100/133 Connectors
- 6 x SATA 3.0 Gb/s Connectors; 2 x USB headers, 1
x IEEE1394 header
|
|
Back Panel I/O
- 1 x PS/2 Keyboard, 1 x PS/2 mouse
- Silent OTES, 1 x S/P DIF In/Out
- 7.1 CH Audio connector (Front, Line-in, MIC-in,
Center/Subwoofer, Surround, Rear Surround)
- 4 x USB2.0, 1 x IEEE1394, 1 x RJ-45 LAN Connector
|
|
Compatible
Accessories
|
|
Form Factor
- ATX form factor 305 x 245mm (12 x 9.6 inch)
|
Discuss in Forum
Next >>>
| |
|